LogEt 1 LogEt 6 LogEt 8
Config Information
Select Your Logger
LogEt 1
LogEt 1 TH
LogEt 1 Bio
Basic Settings
Temperature Unit Logging Interval Run Time Start Mode Start Delay Stop By Button Repeat Start Circular Logging Temporary PDF Temperature Calibration Light Detection Backlight Time Time Zone Language
H M S
20days
D H M
Alarm Zone Alarm Threshold Alarm Type Alarm Delay
H M S
H M S
H M S
H M S
H M S
H M S
H M S
If the device password is enabled, users are required to verify the password when setting the device. This will have no effect on reading PDF report.
Original Password (for verification)
New Password
Download Configuration File Plug in data logger, a removable storage device “ELITECH LOG” will appears on the computer. Drag and save the downloaded configuration file ( “.ncfg” format) into the removable storage device“ELITECH LOG”, the file will upload and configure the logger automatically. Single use data loggers are allowed to be reconfigured through configuration file, ONLY if the logger has not been started. Please unplug and plug in data logger before reconfiguring. System time can not be synchronized via online configuration site, only time zone can be configured. When "SUC" appears on the LCD screen, the logger configured successfully. When "FAL" appears on the LCD screen, the original password is wrong. Please try again. When "FAL-1" appears on the LCD screen, the check is wrong. When "FAL-2" appears on the LCD screen, the model is wrong. When "FAL-3" appears on the LCD screen, the original password is wrong. When "FAL-4" appears on the LCD screen, the configuration is not supported in the current state.